Commercial Dual Gauge Primary Keg Beer Regulator
Model:T742
Highlights
- Low pressure gauge (the top gauge) indicates output pressure to keg
- High pressure gauge (the side gauge) indicates CO2 tank pressure remaining
- Ball-type check valve helps prevent product back-up into the regulator, a common source of malfunction
- Gray polycarbonate bonnet provides easy pressure adjustment and will not chip, break, or fade
- All regulators are pressure tested to assure in-field reliability
This dual gauge regulator is loaded with features! The regulator has a large hand control which makes it easy to adjust the pressure inside the keg. This is a double gauge regulator with the main gauge indicating how much Co2 pressure is inside the keg.
WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
- Gray polycarbonate bonnet will not chip, break or fade.
- Non-adjustable "shut-down" built in to the body of regulator
- The high pressure ports have left-hand female threads to prevent their use as a lo-pressure outlet
- The non-removable adjusting screw is designed so that when it is turned all the way in the maximum downstream delivery pressure will not exceed 50 PSIG.
- Internal relief valve opens whenever delivery pressure exceeds set pressure by 15 PSIG. This feature serves as a warning that the seat or diaphragm may be worn or damaged and should be replaced.
- Sintered metal flow control filter in the inlet nipple to prevent dirt and other particles from damaging internal regulator parts.
- Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks... no need to use a new fiber washer each time tank is changed.
- Outlet features NADS 1600C shutoff which eliminates a source of gas leaks. The ball-type check valve helps prevent product back-up into the regulator, a common cause of malfunction in the regulating and relief valve parts. Hose barb end designed for use with 5/16" I.D. pressure tubing.
- All regulators are pressure tested to assure in-field reliability.
- Seat assembly is easily replaceable in-field... no need to remove regulator from tank.
WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.Commercial Dual Gauge Primary Keg Beer Regulator Reviews
| Average Customer Rating: | (5) |
| (based on 19 reviews) |
| Soda blast !!! | |
| by: | Jack D. Limenator (10-27-2017) Malvern, AR> |
| Comments: | I use this to make home made soda. Very easy to use. |
| Bottom Line: | I would recommend this product. |
| Works Great! | |
| by: | Rich (04-13-2016) New York |
| Comments: | Glad I picked this one out. Works great. Much better than the stock unit. |
| Bottom Line: | I would recommend this product. |
| Excellent gages, works great | |
| by: | Shawn (03-22-2016) Atlanta |
| Comments: | These gages solved my CO2 leak |
| Bottom Line: | I would recommend this product. |
| Great gauge! | |
| by: | Wags brewery (03-12-2015) Dallas |
| Comments: | This gauge is very easy. The knob is easy to turn. Many have to use a screwdriver! Aaauugghh!! Recommend |
| Bottom Line: | I would recommend this product. |
| Good Primary Regulator | |
| by: | PaulKegger (11-10-2014) Healdsburg, CA |
| Comments: | I have a three tap keggerator and this works good with a short tube connecting the 3 guage. Only challenge is with the knob when pushing it back in lock possition it makes really fine adjustments challenging, but not impossible. All in all, it's what I needed and it works well!! |
| Bottom Line: | I would recommend this product. |
Be the first to ask a question.