Kegco Grain Mill with 11lb Hopper and 3 Rollers

Model: KM11GM-3R
23 Reviews
$334.00SAVE 35% - $116.90


90 Day Money Back Guarantee
IN STOCK (usually ships within 24 hours)
  • 11 lb. capacity aluminum grain hopper
  • Heavy-duty three-roller mill with adjustable secondary gap-spacing
  • Features integral drive shaft and axles
  • Grain mill can be hand-cranked or motorized with a corded electric drill
  • Now includes a black metal base that fits over common 5 gallon buckets

The Kegco KM11GM-3R Grain Mill is perfect for large batches and high efficiency milling. With three rollers, all your grain will be crushed twice in one cycle. The initial crush is through the fixed gap between the top two rollers, and then the grain passes through the second gap between the drive roller and the adjustable bottom third roller. The initial pass slightly flattens the grain, getting it ready for the next crush that breaks apart the grains and loosens the starch with minimal husk damage

The aluminum hopper can hold up to 11 lbs of grains and the roller body features an alloy block frame that houses three steel rollers on stainless steel ball bearings. The drive shaft and all axles are integral to the roller, which makes clockwise or counter-clockwise drive possible. A hand crank is included, but the mill can be easily motorized with a corded electric drill. You don't need any additional attachments, just stick the drill on and go. Stainless knurled knobs allow a gap spacing adjustment range of .070". Adjusting is simple - just loosen the adjustment screws, adjust the gap and tighten the adjustment screws. Now includes a black metal base that fits over common 5 gallon buckets.

  • 6" long adjustable gap
  • Fully adjustable mill
  • 0.060 fixed primary gap, 0-0.065 fully-adjustable secondary gap
  • Dual eccentric adjusters built from stainless steel for no galling
  • 8 lbs / minute is average throughput
  • 6" x 1.5" diameter steel rollers
  • Crankshaft can be turned clockwise or counterclockwise
  • Durable alloy frame
  • Stainless steel ball bearings
UPC: 700697198881


Love this Grain Mill

Had a $150 two-roller mill from another vendor which from the first crush had large amount of metal filings right up until it stopped feeding grain, hated it from day one. I wish I knew about this mill and spent the extra money. I love, love this mill. It feeds nice, quiet, and quickly. The crush is beautiful. The two-roller mill would pulverize while this mill leaves the hulls almost intact and crushes the grain.


Very sturdy

I bought this mill to crush my own grains. The first thing that got my attention was how heavy and sturdy it was. It works smoothly and does an excellent job of milling. The only knock on this product is that it did not come with instructions for assembling the hopper. I was able to download them from the internet and once I saw how it goes together it was pretty simple.


Everything I hoped for!

This mill is awesome! Made to work. Easy to put together. Just used for the first time & ground 12 lbs with 300 cranks by hand. Less than five minutes. All the parts are sturdy, well machined & precise. So happy to not have to leave the house to grind. I fashioned a grain box out of 3/4 plywood. Feel like I’m set😊


The Best Mill I've ever used

I am crushing winter wheat for cattle and chickens and this does a great job. My grandson and I did 500 pounds in about 45 minutes. Use a corded power drill at 300-500RPM. We did get a better crush for our purposes with the third adjustable roller removed to avoid the dry grain binding. The results with 2 rollers was perfect! Thanks Kegco and Beverage Factory!


Heavy Duty

Only used this twice so far, but it chews through grain like a beast. Nice heavy rollers with smooth operation, and the gap is extremely easy to adjust. Easy to put together, just download the PDF and you're off to the races!

Showing Reviews 1-5 of 23
 1 2 3   Last
Can this be also used to crack corn?
by Bill on May 02, 2020
Hi Bill- Our grain mills are not designed to crack corn.
by Jennifer on August 20, 2020
Staff Answer
Can this be used to make flour or cornmeal?
by Amy on May 20, 2020
the KM11GM-3R can only be used to mill grain, it will not mill corn
by Erika on August 19, 2020
Staff Answer
can it grind whole kernel corn?
by yank on May 23, 2020
The grain mill can't grind corn
by Erika on August 18, 2020
Staff Answer
Can you grind corn with it?
by Curious girl on June 10, 2020
This unit is unable to grind corn.
by Erika on August 17, 2020
Staff Answer
Is this grain mill capable of milling corn?
by distiller Dan on June 13, 2020
Hi Dan- Our grain mills are not equipped to mill corn.
by Jennifer on August 20, 2020
Staff Answer
Showing Questions 6-10 of 15
  1 2 3  


Added to Cart